IPO4U — Indian IPO GMP & Intelligence Platform
Quick Jump
Use ↑ ↓ to navigate · Enter to openEsc to close
Open IPOs
IPO SpecificFree & Client-Side PrivateLive ComputationUpdated for FY 2025-26

IPO Lot Size & Listing Gain Calculator

Calculate IPO lot cost, the amount needed to apply, and gross listing gain or loss in rupees and percent. See worked examples and an allotment guide.

How to calculate IPO application cost and listing gain

Multiply the number of shares per lot by the lots you plan to apply for, then multiply by the price per share. That gives the application amount at the price you entered. To estimate listing gain or loss, subtract the issue price from your hypothetical listing price and multiply the difference by the number of shares assumed to be allotted. The calculator assumes you receive every share you apply for and shows the gross result before charges and taxes.

How to use the IPO calculator

  1. Issue price. Enter the price per share in rupees. If an IPO is still open and you are estimating how much cash to set aside for an eligible cut-off bid, use the upper end of the price band. Once the final issue price is published, use that price to estimate your actual purchase cost and return.
  2. Shares per lot. Enter the bid lot shown in the offer document or exchange notice for the issue. The lot size tells you the number of shares in one lot. Check the minimum number of lots for your application category separately.
  3. Number of lots. Enter how many lots you want to model. If the lot size is 100 and you enter 2, the application is for 200 shares. Enter the number 2 in this field and 100 in the lot size field.
  4. Hypothetical listing price. Enter the price per share you want to test. Try one below the issue price, one equal to it, and one above it. Each scenario gives a different gain or loss while leaving the application amount unchanged.

You can find issue dates, price bands and lot sizes in the upcoming IPO list. Confirm the terms against the offer document or the exchange's latest issue notice before placing a bid.

How lot size affects the IPO application amount

An IPO lot is a group of shares used as a bidding unit. Consider a hypothetical issue with a ₹140 to ₹150 price band and 100 shares per lot. At ₹150 per share, one lot requires ₹15,000, two lots require ₹30,000 and three lots require ₹45,000. Each additional lot adds 100 shares and ₹15,000 to the calculation.

The lot size and minimum application answer different questions. An issue can define the quantity in one lot and require more than one lot for a valid bid. This matters in particular when looking at SME IPOs. Check the minimum quantity, bidding multiples and category conditions for the specific issue. A calculator result for one lot is valid arithmetic even when that bid size is ineligible. NSE e-IPO FAQs

The upper band, final issue price and listing price can all differ. If the final issue price is ₹145 and you receive 100 shares, your share cost is ₹14,500. Your earlier ₹15,000 estimate was based on the upper band. After pricing, use ₹145 as the cost per share when you calculate the return. SEBI guide to book building

IPO listing gain formula and worked examples

Gross listing gain or loss in rupees
(Listing price − issue price) × shares allotted
Listing return as a percentage
[(Listing price − issue price) ÷ issue price] × 100

Suppose you receive 100 shares at ₹150 each. If the shares list at ₹180, the opening value is ₹18,000 against a ₹15,000 purchase cost. The difference is ₹3,000, or 20% of the purchase cost. At ₹135, the shares would be worth ₹13,500 at listing, a loss of ₹1,500 or 10%. The same inputs can show a gain, a loss or zero gross return depending on the price you test.

Example with 100 shares allotted at ₹150 each
Listing priceListing valueGain or lossReturn
₹135₹13,500−₹1,500−10%
₹150₹15,000₹00%
₹165₹16,500+₹1,500+10%
₹180₹18,000+₹3,000+20%

If you receive 200 shares at the same issue price and the stock lists at ₹180, the gross gain doubles to ₹6,000 while the percentage stays at 20%. When comparing two IPO scenarios, the percentage tells you the return relative to the cost of the shares. The rupee result tells you what that price move would mean for the quantity you hold. If you sell after listing, use your executed sale price to work out the realised result and account for applicable charges separately.

What happens to the application amount after allotment?

Under Application Supported by Blocked Amount (ASBA), the application amount is held in your bank account during the process. After allotment, the amount owed for the shares allotted is debited and any excess block is released. If you receive zero shares, the blocked amount is released. The actual debit depends on the allotment and final issue price. SEBI guide to ASBA

For example, you model two lots of 100 shares at ₹150, an application amount of ₹30,000. If you receive one lot and the final price is ₹150, the shares cost ₹15,000. At a ₹180 listing price your gross gain scenario is ₹3,000 on those 100 shares. To model that outcome, change the number of lots to one and use the final issue price. You can start with the IPO allotment guide to find the relevant issue, then confirm your share count with its official registrar.

How to use grey market premium in a listing scenario

Grey market premium (GMP) is an unofficial quote expressed per share. To model a scenario with a ₹150 issue price and ₹20 GMP, enter ₹170 as the hypothetical listing price. A GMP of −₹10 would give a ₹140 scenario. Keep the issue price at ₹150 so the calculator measures the difference against the share cost you assumed.

Check the timestamp if you use a figure from the IPO GMP tracker. Grey market quotes can change before listing. The exchange listing price depends on trading at the time the shares start trading, and the price at which your order executes may differ again. Compare the GMP scenario with an at-issue-price and a below-issue-price scenario to see how the outcome changes.

Quick Reference FAQs

Answers to common questions regarding calculation assumptions and methodology.

Yes. You can enter a hypothetical issue price and lot size to compare budgets. Update both assumptions once the company publishes them. If only one input is known, the result still depends on your guess for the other.

The result is gross. To estimate what you actually keep on a sale, start with your actual sale proceeds, subtract the share cost and account for charges and applicable taxes. A listing price equal to the issue price produces zero gross gain, and selling costs can still reduce your proceeds.

The calculator measures shares requested, application cost and potential listing return. Allotment depends on the issue rules, subscription and the published basis of allotment for your category. Use that document or the registrar's result to confirm the outcome of your bid.

Explore interconnected tools to model your investments, loans, and returns.

All 9 Tools